[Chrysler300] Ram K Brake Pedal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Ram K Brake Pedal





Hi John and Rich

Thanks for your responses.

All the pedals I've seen have two holes to attach the pushrod at different heights based on the support plate being used.

John makes sense saying the upper hole would give more pressure but I always assumed the manual master needed to have more TRAVEL. In pictures , it seems the master cylinder on Ram Ks sits very low on the support plate.

I'm going to the Chrysler Nats in Carlisle tomorrow armed with a flashlight , camera and tape measure. Hopefully will have some answers on my return.

Thanks

Jeff Miklas



__._,_.___

Posted by: leslie miklas <ldmiklas@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.