[Chrysler300] More 300G Dash Bezel Information
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] More 300G Dash Bezel Information



300G Dash Molding information...
Some members have said .
“ All 300G's came with a clock “.

“ Note that in 1960, the bezels were on the radio and the clock and in 1961 and 1962, the bezels were on the trim itself. So I don’t think the 1960 radio block off plate would work on the later cars. “


“ To my knowledge they only had one radio map light bezel. If car had no radio their was a radio delete plate that covered entire radio area knob holes and all. The delete plate said Chrysler my dads 62 came without a radio and had this plate. If car came without a clock their was a block off plate plate which fit behind bezel and matched dash trim. As far as I know all models even Newports came with map lights. Therefor I believe their was only one bezel for all options. “

“ I don't have one to offer, but here is a photograph of a 300G dash with factory radio delete plate. The clock was a standard equipment item on the 300G, but they still would have had to come up with something for a lesser model if the clock was not ordered, not sure what they did there.”
With more research this is what I have found.
One member sent me photos of a 300G that has a Clock and NO Radio. I also have two Bezels that I have photos of. It would be so nice if photos could be added to these posts.
The photo of the 300F has the radio Delete Plate and the Clock has its own independent Bezel that is not attached to the larger Bezel
The photo of the 300G shows the Radio Delete Plate and the large Bezel has the frame around the clock, so that is one type of Bezel. There is Not a frame where the Radio would be . A frame at that location would interfere with the Radio Delete Plate. This is the Bezel that I need. 

In the other photo there are two more but different Bezels. The one without any frames around the Clock and Radio could be from a 300F or might be from a 61 or 62 Chrysler without a Clock or Radio.

The other Bezel clearly has a frame around the Clock and a frame around the radio. From earlier replies this Bezel would be for a 61 or 62 Chrysler with a Clock and  a Radio.

I am sending the photos to those that replied to my earlier post.
If anyone else wants to see the photos send me an email and I'll send them to you.

I am looking for a Bezel for a 300G without a radio and does have a Clock . Can you please check your parts inventories and see if you have one ? I am NOT looking for a Radio Delete Plate. Someone has already offered one to me.
Bye and have a great day !!!

Charlie Valentine
300G
1962 300 Sport Convertible


------------------------------------
Posted by: Charlie V <cv300g@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.