Re: [Chrysler300] 300K single carb
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300K single carb





We have had good luck with Walker Kits, they are a little stingy on base and air horn gaskets.




From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Tuesday, June 6, 2017 4:05 PM
To: Listsaver 300 Club
Subject: [Chrysler300] 300K single carb
 
 

No I was not going to attempt the rebuild of the carburetor myself.  An age appropriate (older than me) factory tech will be doing it.  He said he was going to use a Walker kit but wanted me to check with the club members first to see if there was a different one that someone would recommend.  Or some other specific details that might be suggested.



__._,_.___

Posted by: RICK AND DEBBIE CLAPHAM <rixpac@xxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.