RE: [Chrysler300] 55 spark plug tubes & spring tin clips

I distinctly remember buying a set of those spring clips from a member in the club that was producing them. Just can’t recall a name.

Very effective. Seemed a lot like standard black-colored steel strapping for the raw material—carefully bent to fit, hold and stick.

The ignition wire covers on the hemi rocker-arm covers look neat but I always wondered if this was the best way to get the spark from the distributor to the spark plug. Racers and manufacturers seem to prefer lots of air space between spark plug wires and lots of insulated stand-offs to properly space out the wires.

C-300’ly,

Rich Barber

Brentwood, CA

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'grahamowner@xxxxxxxxx' GrahamOwner@xxxxxxxxx [Chrysler300]
Sent: Thursday, June 01, 2017 8:04 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 55 spark plug tubes & spring tin clips

Thanks to all for your suggestions and resources. We have found all but those spring clips. Denny told me I have much more patience than he does so it will be my job to try Marshall’s suggestion. Thanks a lot Marshall!! I’ll let you know if I ever get them done.

Love the fact we have this list server.

Sharon

On May 31, 2017, at 7:01 AM, David Schwandt <finsruskw@xxxxxxxxxxxxxxx> wrote:

Machine bushing, they come in different thicknesses also

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'mgoodknight@xxxxxxxx' mgoodknight@xxxxxxxx[Chrysler300]
Sent: Wednesday, May 31, 2017 6:44 AM
To: GrahamOwner@xxxxxxxxx
Cc: Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 55 spark plug tubes & spring tin clips

The spark plug tubes are available from Hot Heads Research and Racing. I'm not sure if you can buy just 3 from them, but I've bought 2 sets. The steel washers are available in packs of 3 at Tractor Supply Company and are labeled "bushing". In my files I should still have a part number for them, but I'll need to search for a bit to verify. The original spring clips might be hard to find, so I made 2 sets of them from an old recoil starter spring (from a lawn mower engine). For that you need a good pattern and a little patience in proper bending. Depending on the spring quality you might need to heat it a bit.

---------------Marshall Goodknight

---------- Original Message ----------
From: "'grahamowner@xxxxxxxxx' GrahamOwner@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 55 spark plug tubes & spring tin clips
Date: Tue, 30 May 2017 19:23:27 -0500

Hi all, hope someone can help us.

We are looking for 4 aluminum plug tubes with steel washers and a set of spring clips to hold the wires apart for our C300. Does anyone have any extras or can you direct us to who might have what we need.

Thanks in advance.
Sharon and Denny Gerber

____________________________________________________________
3 Common Foods Surgeons Are Now Calling "Death Foods"
3 Harmful Foods
http://thirdpartyoffers.juno.com/TGL3132/592eacface3ed2cfa14ccst04duc
<~WRD000.jpg>

__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___