During the trip to the meet in Geneva, which was very enjoyable despite the weather -- many cudos to Jamie, Dawn and Bob -- it became clear on the secondary roads I took that the front end alignment needed attention. During an alignment
yesterday using the Club specs, they could not dial in enough camber and said that I need an offset eccentric cam bolt kit. I can find 3 kits that fit a '60 New Yorker (but not listed for a 300) -- Moog, Mevotech,, and Centric, with the latter providing the
most adjustment. Are these kits difficult to install? Which is preferable? Any input is welcome.
Al
__._,_.___
Posted by: Albert Vannice <MAVCHE@xxxxxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
__,_._,___
|