Re: [Chrysler300] cooling problem on my F

["Scooter465@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Could be bad temp sending unit.

Cheap and easy to change.

Sent from my iPhone

On Apr 27, 2017, at 10:37 AM, Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Good day to all 300 ites,

Getting ready to drive the F to the spring meet in NY which at this time is probably not going to happen.

quick rundown-

put 5000 miles on the car last year- no cooling problems. needle stayed on middle of temp. gauge.

put 800 miles on the car this spring, still no problems.Pulled radiator a month ago and had it tested. It was  Ok.

Last week went out for 200 mile run, no problem, next day 100 miles and gauge moved to close to Hot.

took it in to the mechanic Monday, infrared reading showed 190ish. at both hoses

New water pump, thermostat, all new hoses.

Flushed engine 2 times .

Picked up the car yesterday and on the 5 mile drive home temp gauge went to below hot?

rebuilt motor 30 years ago but less then 200 miles on the motor till last year.

thanks in advance for input

Steve Beard

300F in Delaware, ohio.

 

__._,_.___

---

Posted by: scooter465@xxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 2

• Privacy • Unsubscribe • Terms of Use

__,_._,___