Re: [Chrysler300] quarter windows
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] quarter windows





Harry,

If you need to help the motor lift the glass, it sounds like it may be time to pull the interior panels and lube all the window operating mechanisms and channels. I just had that done over the last couple of days at the body shop on my manual side glass because they were getting to be difficult to raise and lower, and I figured that must be hard on the moving parts as well. I had them use the (newly discovered to me) lube product called Fluid Film on everything inside there, and had them lube the door latch parts with it while they were in there.

The body shop guys say they are pretty amazed at how well the Fluid Film product works. Knowing it won't dry out is the real plus. Advance Auto was able to order a rattle can in for me. Whatever you do, don't use white lithium grease as it will harden into concrete over the years and jamb things up.

Keith Boonstra
-

On Wed, Apr 19, 2017 at 10:50 PM, Harry Torgeson torg66@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

I found out that the quarter windows are sticking and I need to pull on them to get them all the way up,  but the master switch is working for them.
Thanks for the help.

On Wed, Apr 19, 2017 at 2:14 PM, Gary Nelson <gnelson@xxxxxxxxxxxx> wrote:
Harry,
 
The master swt. is likely your problem. You can disassemble, can be tricky. If you get it apart you clean the contacts, lube and reassemble.
 
Gary
 
Sent: Wednesday, April 19, 2017 12:09 PM
Subject: [Chrysler300] quarter windows
 
 

My 1964 K convert electric rear windows do not respond to the drivers controls, but I can move the windows at each back seat switch, can it be bad contacts on the drivers door, any ideas how to fix?

Thanks
Harry





__._,_.___

Posted by: Keith Boonstra <kboonstra@xxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.