When I lived in LA, there was a place in Chatsworth which specialized in repairing cast iron parts (heads, manifolds) by oven brazing them. In other words, they raise the temperature of the entire part high enough to allow the brazing material to fuse and then broughtthe temp down slowly to avoid warpage, This sounds right to me intuitively. Mike Moore 3ooH On Jan 24, 2017, at 2:05 PM, 'Bob Jasinski' rpjasin@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: I got a phone call from a gentleman with a 300G that has a cracked right side exhaust manifold. Knowing how hard it is to find a replacement, can anyone suggest a facility that knows how to repair manifolds? I realize it is a very specialized job that is outside of the abilities of most welders, but may be possible. Has anybody found someone that knows how to do the job so it holds up over time? If it is even possible? I'd like to help him out if I can, and if you happen to have a replacement manifold you'd like to part with, let me know. Thanks! Bob J __._,_.___ Posted by: Michael Moore <mmoore8425@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |