RE: [Chrysler300] Cast iron elbos for F-G rams

["'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

I have often thought someone in club should weld these up from steel ½” weld pipe fittings as repro project  ; make the flanges, weld or braze in a jig  ; cast iron very unhappy there , position changes with temp with long aluminum rams. the ears break off, kind of flimsy ; that has been on back burner here for many years. Steel is malleable , will not crack,

 

John

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of George McKovich george@xxxxxxxxxxxx [Chrysler300]
Sent: Wednesday, December 07, 2016 3:59 PM
To: David Schwandt
Cc: Val Jeffers; Sandy Beard; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Cast iron elbos for F-G rams

 

Dave

I believe that is correct but the are shorter on the 413 than on the 383 and 361.

 

George

 

On Dec 7, 2016, at 1:40 PM, 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Pretty sure they are the same left to right.

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Val Jeffers edward1108@xxxxxxxxx [Chrysler300]
Sent: Wednesday, December 07, 2016 1:37 PM
To: Sandy Beard; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Cast iron elbos for F-G rams

Just asking, wouldn't Jeff know ?

Sent from Yahoo Mail for iPhone <https://yho.com/footer0>

On Tuesday, December 6, 2016, 9:19 AM, Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hi 300 ites,

Are there L and R cast exhaust elbows for F G rams or just one that fits both sides. Looking for them to get my rams on and Jeff C. is out of them. 2 on ebay but does not say L/R

Thanks

Steve Beard

300 F

Delaware, Ohio

[Non-text portions of this message have been removed]

__._,_.___

---

Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___