RE: [Chrysler300] More stuff needed

Yes, tips would be the same. Pot metal and visor pad are slightly different.

Rich

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Peter Fitch pffkllc@xxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 5:43 PM
To: Rich Barber <c300@xxxxxxx>
Cc: Don Cole <mr300k@xxxxxxxxx>; Noel Hastalis <cpaviper@xxxxxxxxxxx>; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] More stuff needed

I know the hardware is different, but the tips may well be the same.

Pete

Sent from my iPhone

On Oct 6, 2016, at 6:34 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Thanks, Gentlemen:

Gary’s catalog shows two different tips, both for ’60-’62. I’ll take a look at Legendary’s offering, although it seems they may have been the ones claiming 1964 HT & Conv. visors were the same. Not sure of which vendor—just something to watch out for. I was able to buy a good used set of visors for our Konv in wrong color and sprayed them black.

Rich Barber

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Don Cole mr300k@xxxxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 3:22 PM
To: Noel Hastalis <cpaviper@xxxxxxxxxxx>
Cc: Rich Barber <c300@xxxxxxx>; pffkllc@xxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] More stuff needed

Legendary has them. Just ordered replacement visors for my K and they offered them.
D. Cole

Sent from my iPhone

On Oct 6, 2016, at 5:33 PM, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Got my plastic tips from Gary Goers a few years ago.
Noel

Sent from my iPhone

On Oct 6, 2016, at 4:20 PM, 'Rich Barber' c300@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Pete:

Be sure to note that the hardtop and convertible visors and hardware are different. A vendor tried to convince me otherwise, but they have different dimensions. The hollow plastic tips get brittle and broken after 50 years + and I searched widely for an appropriate replacement from other stuff, like tubing. Anyone found a suitable replacement for the little plastic tubes?

Rich Barber
Brentwood, CA

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pffkllc@xxxxxxx [Chrysler300]
Sent: Thursday, October 06, 2016 10:08 AM
To: chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] More stuff needed

Hi Group:

I am looking for the channel that holds the boot for Anne's K convert. This piece attaches to the back of the rear seat. I also need the visor hardware along with the plastic tips, for the K convert. We scavenged the ones from our other convert and now have to replace them.

Thanks,

Pete Fitch

__._,_.___

Posted by: "Rich Barber" <c300@xxxxxxx>

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___