John, The concern I have is that weatherstrip cement is contact cement. It does not allow for adjustment once the two pieces are brought together. I would also be concerned about the solvent attacking the painted back. That's why RTV silicone works well, it stays flexible, won't attack the plastic (paint) and takes a while to cure, giving you plenty of time to step back and make sure the medallion is level and correct if needed. Bob From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'John Grady' jkg@xxxxxxxxxxxxxxxxx [Chrysler300] I’d go 3M “clear” (yellow) “weatherstrip cement”--- it is flexible. Like rubber cement. Follow directions..trial fit, then put some , probably in a thin ring on both surfaces let get tacky, press on. Stuff that dries or sets rock hard may crack , causing loss of emblem as plastic and metal expand differently with temp. There is probably a blob of hard stuff left behind now. I am sure there 100 opinions. Super glue is fussy stuff. I’d say that is not good. You never know if it “took off” ; also solvents in glues can attack back of emblem if lots slobbered on , = go cool and easy. From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Val Jeffers edward1108@xxxxxxxxx [Chrysler300] Hi All, What is the best way to attach the above emblem ? I have a new tube of "super glue" but wanted help first. Thanks, Val Jeffers __._,_.___ Posted by: "Bob Jasinski" <rpjasin@xxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |