|
Agree..I’d add hood pull inner cable. The thrill of having the T inside on the dash , marked “hood” come off in your hand while hood is still locked grows old fast (F) From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300] I guess one of the good things about owning letter cars as 'fair weather antiques' is that the valve being in the open position all the time doesn't really have any bad effects on performance since I don't use it as a winter beater. I'd rather have a reproduction piece of stainless for below the trunk of my G, reproduction vacuum advance for the distributor, or other shiny bits for the interior. On Tue, Jun 14, 2016 at 7:08 AM, 'Bob Merritt' bob@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Forwarding message below from Mike Vanderveen. ------ Forwarded Message ------ From: "Michael Van der veen" <michaelvanderveen8@xxxxxxxxx> To: "Bob Merritt" <bob@xxxxxxxxxxxxx> Sent: 6/13/2016 11:28:33 PM Subject: Re: can't post a new topic please pass onto group! Hi all, just wondering about the possibility of reproducing ram cars manifold heat control valve as these parts are impossible to get hold of. What are people's thoughts? Mike in Australia -- "A government big enough to give you everything you want, is big enough to take away everything you have." ... Thomas Jefferson __._,_.___ Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap