FW: [Chrysler300] F Ram Tube Mounted Anti-stall Vacuum Pot

["'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Jim McGowan had 2 of them done for me several years ago.

Have no Idea where though.

They turned out nice but the fix included a new outer band crimped over the
original crimp that had t be sliced open to replace the diaphragm.

Not really that noticeable though.

No one but me has spotted it yet!

And it has made 2 round trips to east PA so far!!

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 'John L. Chesnutt' chesnutt@xxxxxxxxxxxx [Chrysler300]
Sent: Thursday, February 18, 2016 3:41 PM
To: 'Allan'; '300 Club Listserver'
Subject: RE: [Chrysler300] F Ram Tube Mounted Anti-stall Vacuum Pot

 






Hi Allan & Gloria,

They are a great company and do great work. I have not had them do an
Anti-stall vacuum pot, but I know of other Chrysler Club members who had
them done.

They are a small company near down town Portland. Never had any complaints.

 

John

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of 'Allan' agmoon@xxxxxxxxx [Chrysler300]
Sent: Thursday, February 18, 2016 12:37 PM
To: 300 Club Listserver
Subject: [Chrysler300] F Ram Tube Mounted Anti-stall Vacuum Pot

 






Hi all,

 

Is there someone else who rebuilds these pots and replates them besides
Philbin Manufacturing?  Are they zinc plated, "silver" in color?

 

About a year ago someone said that Philbin Manuf. in Portland OR rebuilt
their anti-stall vacuum pot, the one that bolts to the long ram tube.  They
said that they got theirs back from whomever did the work and it was
beautiful and worked perfectly.  They also said that the unit was replated
and everything.  It looked brand new!

 

I just talked on the phone to Joe at Philbin who wasn't familiar with this
pot.  He said that they don't replate anything, just fix the problem (likely
a bad diaphragm).  We are now sending Philbin pictures so everybody is on
the same page but...

 

So we would like hearing from those of you who have had their ram pots done
by Philbin or any other company.

 

Thank you.  We appreciate any Info. on the subject.

 

Allan & Gloria  

 

 

 

    






 










[Non-text portions of this message have been removed]



------------------------------------
Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/