Re: [Chrysler300] 300G Rear Brake Backing Plates

["John Nowosacki jsnowosacki@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Those adjusters do have a tendency to freeze up over time if not adjusted periodically.  One fix I've seen in the past is to take a nut (like a 3/4" size) and weld it to the rounded off adjuster stud.  Now you have a 3/4" adjuster instead of the rounded off 7/16" that was originally there.  (Don't force it, get a bigger hammer!)

On Wed, Feb 10, 2016 at 5:32 AM, cv300g@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Does anyone have a SET of Rear Backing Plates that they are willing to part with.

I also need the Supports .

The Supports are the double plated device that the Brake Springs attach to and they also have the adjusters that go thru the backing plate to adjust the brakes. The adjusters on mine are rounded as if someone in the past used vice grips on them to adjust the brakes.

Lion Charlie Valentine

300G, 1962 300 Sport Convertible, 1965 Plymouth Barracuda

__._,_.___

---

Posted by: John Nowosacki <jsnowosacki@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___