|
John, on my 300H , I purchased cardboard from a local upholstery shop. I carefully removed the old upholstery and chrome trim and stripped the cardboard to bare. I used an Xacto knife and carefully cut two new panels. I found the size was very important as is the location of all the holes for the fasteners. I put several cats of varnish on the cardboard. You can then stretch the old upholstery onto the cardboard using upholstery cement glue it to the cardboard. I think I actually got new skins from Gary Goers, but there’s no reason you can’t stretch what you have. That’s what I would do. Good Luck, Mike Moore 300H On Sep 22, 2015, at 11:58 AM, John Lau Mjdreamachines@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: Hello Again! On our 300G the door panels are a little wrinkled beneath the handle. The material seems loose, and I was wondering if there is filler underneath that keeps it taut or is the fabric just stretched out. I am guessing that this is a common occurrence. Any suggestions? The seat cushion in the driver's seat is disintegrating as well. Where can I obtain an insert that is similar to the original? Thanks again for your input! John __._,_.___ Posted by: Michael Moore <mmoore8425@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap