Re: [Chrysler300] 300K Tilt Schematics?

["kmaniak@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hello All:

 

The tilt column used in the 1964 Chrysler was made by Saginaw and does NOT telescope.  The telescope feature came a few years later to Chrysler.  The turn signal switch in a standard non-tilt column is located inside the column behind the steering wheel hub with the signal stalk connected to the switch.  However, on the tilt column, this application uses that Delco-Remy turn signal switch that is attached to the side of the column under the dashboard.  There is a special adapter wiring harness between the standard steering column connector and the Delco-Remy Switch.  You can replace the turn signal switch on the tilt column without removing the steering wheel.  The Delco-Remy switch is interchangible with the same switch used on multitudes of GM products back the day.

 

Chris the K MANIAC

 

 

-----Original Message-----
From: Anna F Noia sa-noia@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
To: David <torquechap@xxxxxxxxx>; Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Mon, Jul 13, 2015 9:49 am
Subject: Re: [Chrysler300] 300K Tilt Schematics?

 

David & All

I too have the Tilt wheel, does yours telescope? Mine does. I need a center cap for the steering wheel, do you have an extra? Also, do you have an extra steering wheel? Mine is marginal, and finding parts as you know is difficult, so when some body has one I must ask, you never know who has parts, also, if someone has the exploded view, give it to David first, and if available I also can use one.

PS: supposedly, the tilt/telescope column was sourced from General Motors (perhaps a Saginaw?), may help in the exploration for parts.

Best Regards,
Stephen A. Noia
1-408-210-4736 cell

On Monday, July 13, 2015 9:08 AM, "David torquechap@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hi All,
I'm in the midst of replacing the turn signal in my Ram K (tilt wheel option). Might someone have an exploding view schematics on the wheel and steering column?

We can't find anything online.

300KL'y,

David Morrison
Philadelphia
TorqueChap@xxxxxxxxx

__._,_.___

---

Posted by: kmaniak@xxxxxxx

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___