[Chrysler300] installing harmonic balancer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] installing harmonic balancer





So I had the balancer rebuilt. Install it to the point the tool  won’t go any further. Mount pulley on balancer but belt grooves don’t line up with grooves on water pump pulley, etc. How far to install balancer? Is end of snout on balancer supposed to be flush with end of crankshaft? Haven’t been able to get it on that far and already snapped one installation tool. This is on a 413 for a G. Thanks in advance.



__._,_.___

Posted by: "Rick Vitek" <rpvitek@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.