[Chrysler300] Re: 300F clock
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Re: 300F clock





Thanks to all who offered suggestions. And look in the right place on the club website! My clock is now running fine, on time. I had to go through the clean, lube cycle 3 times to get it right. I was to stingy with the liquid wrench/ contact cleaner first two times. I was hesitant to immerse it in a solution as one suggested. In the end, i drenched all the moving parts/gears, end of axles, then lubed again. toughest part was prying back the tabs that hold it all together. Don't be afraid to try.

On Thu, Apr 23, 2015 at 1:20 PM, Lindsey Fuller <lindsey@xxxxxxxxxxxxxxx> wrote:
Anyone had a go at getting these running again? I only have a week or so before I put the all back together, so no time to send it away. Lights work. recommendations on type of lubricant if I take it apart?
Thks. 
Lindsey in Winnipeg



__._,_.___

Posted by: Lindsey Fuller <lindsey@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.