Al: I hope the rupture did not make too big of a mess and occurred outside the fire wall. I know I have one “somewhere” that I bought new as a spare for my ‘55. The ’55-’58 parts manual says that part fits ’55 Plymouth, ’55-’56 De Soto and ’55-’58 Chrysler. I recall I was surprised to find the rubber hose to be wrapped in steel braid which gives a different appearance than the original which I believe is black rubber exterior. If you don’t get a better deal, let me know and I’ll start digging for it. 300K’ly Rich Barber, P.E. Brentwood, CA From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Albert Vannice mavche@xxxxxxxxxxxx [Chrysler300] Hello Group, Among my other searches, I now find that the engine to oil gauge hose on my E has ruptured, and I need a replacement (part # 1313643). If anyone out there has one by chance or has a lead on one, I would appreciate the information. I am currently contacting all the MOPAR parts suppliers that I am aware of in the hope of finding one. Regards, Al __._,_.___ Posted by: "Rich Barber" <c300@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |