They’re from Autozone. That was his first mistake. My experience is, whenever I buy something from Autozone, I end up making additional trips to the store to get the correct part. The ONLY way to buy from them is to take the original part along to match it. I’ve found that if you’re buying parts for a Chevy of Honda, they always have the right part, and it’s on the shelf. But not for any Chrysler product or Jeep. And when they can get it, it comes in two days later, and most times it’s the wrong part anyway. That’s when I cancel and stop at the local NAPA store. Yes, it might cost a little more, and I might still have to wait for the part, but it’s usually the correct part. My other alternative is Rock Auto. Happy Moparing, Mark From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300] FYI Good thread w/pic’s about Chinese re-pop junk brake cyl’s Makes me think I should start saving the old OEM cyls for cores. http://www.forwardlook.net/forums/forums/thread-view.asp?tid=57103&posts=4#M473840 __._,_.___ Posted by: "Mark Souders" <mrs954@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |