RE: [Chrysler300] 413 pistons
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] 413 pistons





Please correct me, but I believe you can get them from Mopar and .030 on a 413 would bring it close to 426. I know that the ones in the club that are better qualified can assist you. Mopar, Summit, Jegs.

 

Jerry Lindsay

 

Seminole, Florida

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Mwl1967 mwl1967@xxxxxxx [Chrysler300]
Sent: Tuesday, March 10, 2015 10:36 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] 413 pistons

 

 

Hey everyone,

 

    I'm looking for a set of 413 pistons, preferably .030 or .040 over. I see a lot of truck 413 pistons available but not flat top and the compression is too low. I prefer cast over forged or hyperutectic.  Please pm me.

 

Thanks,

Mike Laiserin



__._,_.___

Posted by: "Jerry Lindsay" <jerrylindsay300h@xxxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.