[Chrysler300] RETORQUE HEAD GASKETS?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] RETORQUE HEAD GASKETS?





Is it a good idea to re-torque cylinder head gaskets on a fresh 413 after a short trip of 15 miles?

The original torque sequence was in 3 complete stages.  No leaks during garage activity for cam break in.

Visible fresh oil leaks now (small) at lower rear of both head gaskets, no over heat issues.

This motor is smooth and accelerates well.

Thanks,
Dave in sunny Va.


__._,_.___

Posted by: Dave Dumais <dave.dumais@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.