[Chrysler300]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300]





Hi Group, I know this not  a 300 story, but in 1967 I bought a 1963 Newport 4 dr hardtop with a 3 speed transmission mounted on the floor.  It was stock with a 361 block producing 265 hp and 380 lbs of torque.  The carburetor  was a Bendix 2 bbl.  It would do 55-60 in first and 85 in second, never found top end.  I don't know what the rear was, but assume it was 3.23.  Yes I did race it after installed a BW 3 finger clutch.   Wonder if the transmission was the same mentioned as the 300G 3 spd?
                                                  Stanley 300K


__._,_.___

Posted by: Stanley cOTLER <msgcot2@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.