Re: [Chrysler300] Power Window Gearbox Failure
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Power Window Gearbox Failure





hey 300 group....
 i have had many, many  of these  gear boxes do the same thing (broken plastic ring gear )
 
 bob hayen
----- Original Message -----
Sent: Wednesday, September 03, 2014 6:37 PM
Subject: [Chrysler300] Power Window Gearbox Failure

 

Terry McTaggart here.  Over the last few years, I have experianced two failures in the power window gearboxes in my 300F.   Both failures were identical, in that the plastic gear teeth surrounding the metal disk inside the gearbox broke, rendering the gearbox useless.  Fortunately I had two spares in the attic and was able to replace the offending part.  Now, however, I have no more spares and the next failure (if there is one) will be a major problem.  Has anyone else experienced this failure, and if so, might this be a good project for the repro committee?



__._,_.___

Posted by: "Robert Hayen" <Robert554@xxxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.