RE: [Chrysler300] REPLACEMENT ROCKER PANELS FOR 65 CHRYSLER
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] REPLACEMENT ROCKER PANELS FOR 65 CHRYSLER





No suppliers that I've ever come across. Your best bet is to find a solid donor car and use original steel anyway. Usually the only rusty area of a rocker panel is the rear 12" or so ahead of the rear wheel skirt. Of course 2 door New Yorkers, Newports (Windsor in Canada), 300 Sports would all be the same as the 'L' panels. I wouldn't be surprised if '66 were also a match.

Good luck.

Ryan Hill


To: Chrysler300@xxxxxxxxxxxxxxx
From: Chrysler300-noreply@xxxxxxxxxxxxxxx
Date: Sat, 2 Aug 2014 16:49:12 -0700
Subject: [Chrysler300] REPLACEMENT ROCKER PANELS FOR 65 CHRYSLER

 
Does anyone know if there is a manufacturer of rocker panels for 65 Chryslers, specifically for the "L" ?

George Ver Berkmoes



__._,_.___

Posted by: Ryan Hill <ryan_hillc300@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.