Congrats Dave! Perseverance pays off! Mike Moore 300H On Aug 1, 2014, at 11:30 AM, Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote: On the non-adjustable master cylinder pushrod, there is a small rubber sleeve on the end of the pushrod that goes into the master cylinder piston, that makes it hard to withdraw the pushrod from the master cylinder. However, with enough force it comes out, and the new adjustable pushrod (1/4 inch longer) goes in, and the brake pedal is high and it feels like a new car. Wahoo! Terry McTaggart __._,_.___ Posted by: Michael Moore <mmoore8425@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |