[Chrysler300] 300F Brakes

["Terry Mctaggart terrymct999@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

The saga continues.  New master cylinder; new wheel cylinders.  Brake adjustments at the wheels are right on.  No air in the lines.   Car stops straight and true, but the brake pedal is low.  According to the shop manual, the adjustment for "pedal free play" is in the conection between the brake pedal assembly and the master cylinder.  This connection is a two-part piece, Part 1 being "the end" which connects to the brake pedal assembly, and Part 2, called "the master cylinder push rod", which screws into Part 1.  This screw end provides the adjustment.  In my car, there is only one part, hence no adjustment is possible.  Does anybody know where I might be able to find a two piece end/push rod assembly?  Terry McTaggart

__._,_.___

---

Posted by: Terry Mctaggart <terrymct999@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___