Re: [Chrysler300] Freeze plug for F

["ksimons ksimons@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>]

I always found using the brass ones over the steel much better and I also would use a little of the old Indian Head gasket sealant on them helped.   

Keith Simons

Sent from IPad

On May 25, 2014, at 2:21 PM, "'mgoodknight@xxxxxxxx' mgoodknight@xxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx> wrote:

 

Standard plugs are very reliable unless improperly installed.  Use caution when installing, but no real tricks are required.

            ----Marshall Goodknight

---------- Original Message ----------
From: "'Jean-Yves' jymopar@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300@xxxxxxxxxxxxxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Subject: [Chrysler300] Freeze plug for F
Date: Sun, 25 May 2014 11:56:02 -0300

 

Is there a replacement expansion plug ( freeze plug) for RB blocks that would be more reliable than those dish type welsh plugs?

I thought someone a few months ago posted something about a plug that has some kind of mechanical holder built in the plug, grabs the inside of the block like a block heater plug maybe??

I was road testing my F , one plug came off while passing a vehicle at 80mph...makes quite a big cloud of white smoke!

J.Y.

 

 

____________________________________________________________
The #1 Worst Carb Ever?
Click to Learn #1 Carb that Kills Your Blood Sugar (Don't Eat This!)
FixYourBloodSugar.com

__._,_.___

---

Posted by: ksimons <ksimons@xxxxxxxxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___