Re: [Chrysler300] Re: Another Tire Question

[Edward Mills Antique Tractors <millserat@xxxxxxxxxxxxx>]

Can't comment on the specific tire, but most of these low production tires are made by specialty manufacturers in relatively small lots. If you can get the first 2 letters of the DOT code, you can tell who makes them and where. http://www.harriger.com/tires.htm

Have you considered the P235/75R14 which may be a better match for overall diameter and ride height as well as availability. The old 8.50-14 were about 28.4 inches OD but the P225/75R14 are only about 27.6 inch OD and radials sit a bit lower anyway. The P235/75R14 are 27.9 / 28.0 inch OD.

On 5/7/2014 6:26 PM, Harold wrote:

 

I have been watching all the discussion on tires. It looks like the only option for 225/75/14 tires are the Coker tires. I would appreciate feedback on these radial tires.
Thanks Harold.

Sent from my iPad

__._,_.___

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___