RE: [Chrysler300] Another Tire Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Another Tire Question





The 7.60 x 15 tire was standard on the ’62 and ’63 300’s—down sized from the 8.00 x 15’s on the ’55-’56 & ‘61 300’s.  The ’57-’60 300’s had those big, fat 9.00 x 14’s as does the ’64 NY Salon.  Chrysler stylists knew the value of filling a wheel well and at least put 8.20 X 15’s on the ’64 Imperial.  I believe ’64 Newport cop cars also had 15” wheels but I don't know the tire size.  Probably a perfectly competent size tire but rather wimpy in appearance.  More cost saving by Chrysler.  After switching to non-standard radials, I think it is OK to go with a tire size that satisfies the eye as well as the road.  In this case, either is fine—buy your tires based on known quality and reputation with the closest WSW width you can find.  You may find a greater selection of P235’s.

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Jim Maiani
Sent: Friday, April 25, 2014 5:22 PM
To: Steve Albu
Cc: Chrysler 300 List
Subject: Re: [Chrysler300] Another Tire Question

 

 

But I thought that the radial exact to the 7.60 was the 225 not 235??  If the 235 is more exact to the 7.60, the, yes, I’d rather go with that.

 

thanks

 

Jim

 

From: Steve Albu

Sent: Friday, April 25, 2014 6:59 PM

Subject: Re: [Chrysler300] Another Tire Question

 

Personally, I would not go with the 225s as they seem to be too small compared to the original tires, especially in terms of tire height.  I see no downside to going with the 235/75/15 that are available as radials in a 3/4" whitewall, which is all that is commonly available these days.  I used to get Cooper Trendsetters, but I am not sure they are still available.  I did get a set of the Cornell whitewalls at Pep Boys (their store brand) which seem to be a pretty good tire.  None of the commonly available whitewall tires are very wide anymore but the Cornells were about the best I could find in terms of appearance and size.

 

Steve Albu

 

On Fri, Apr 25, 2014 at 1:13 PM, Jim Maiani <jmaiani@xxxxxxxxxxx> wrote:

 

Hi again guys.  I know we’ve been through this before, but I can’t seem to find my tire emails from the past.

 

I need new radials for my H.  I understand the original tires were 7.60-15, and the radial replacement is 225/75R15,  and it’s supposed to have a 1 1/8” whitewall.  I can’t seem to find this 1 1/8” WW or even a 1” WW in the 225 size.  Does anybody know where?

 

Thanks again

 

Jim Maiani

Houghton Lake, MI

H

From: paul

Sent: Saturday, April 19, 2014 12:32 PM

Subject: Re: [Chrysler300] general reply on starter question plus new question

 

 

On 4/19/2014 11:26 AM, rinandal wrote:
> Hi all, For those that replied thanks for the info. The answer
> appears to be gear reduction starter for 1964 300's.
>
> This leads me to the next question. Anyone starting there cars with
> an after market "mini" gear drive starter? If so any
> recommendations?
>
> Thanks for all the input.
>
> Van

I believe that John Hertog ran one of the new starters in his cars

The info might be in one of the back issue newsletters

--
Paul Holmgren
Spring is Here, I'm so excited,
I Wet My Plants!

 



__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.