Re: [Chrysler300] Wanted - 1964 Turn Signal Switch
From: Anna F Noia <sa-noia@xxxxxxxxxxx>
Date: Mon, 10 Feb 2014 10:01:20 -0800 (PST)
Dave
I have a Tilt / Telescope Column in my 66. Is that too a GM Saginaw unit? Were they identical to the GM units? Or were they just far enough different to confuse parts suppliers now when looking for parts? Just curious, I replaced a standard column with a T/T unit, so far mine has been OK, fingers crossed!?
Best Regards, Stephen A. Noia 1-408-210-4736 cell
From: David <torquechap@xxxxxxxxx> To: Rich Barber <c300@xxxxxxx>; "chrysler300@xxxxxxxxxxxxxxx" <chrysler300@xxxxxxxxxxxxxxx> Sent: Monday, February 10, 2014 9:46 AM Subject: Re: [Chrysler300] Wanted - 1964 Turn Signal Switch
Thanks Rich! Much appreciated,David
On Monday, February 10, 2014 12:39 PM, Rich Barber <c300@xxxxxxx> wrote:
Dave:
It being a GM/Saginaw column, I suggest looking in the Chebby supplier catalogs. I found more problems in the little selector switch at the base of the column than up above. The shop manual has extensive coverage on repair of the Saginaw column.
Rich Barber (from Mesa, AZ this week. 84 predicted for Saturday.)
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of David Sent: Monday, February 10, 2014 9:26 AM To: chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] Wanted - 1964 Turn Signal Switch
Hi All, Looking to purchase a NOS turn signal switch for my '64 300K Ram car. It's got tilt steering.
Appreciate leads on where I can find a unit for my car.
300KL'y,
David Morrison Philadelphia (formerly of New Jersey -- missed the cheese steaks)
__._,_.___
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx