RE: [Chrysler300] adhesive for mounting 300 medallion

I use GE RTV clear silicone. 25 years since installation of my grill medallion, zero problems.

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Bruce Paul
Sent: Thursday, January 16, 2014 2:44 PM
To: Charlie V; sbeard2@xxxxxxxxxxxxxxx; chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] adhesive for mounting 300 medallion

I also used clear silicone caulk to install my 300G grille emblem over 30 years ago and it is still doing just fine.

Bruce Paul
Cherry Hill, NJ

From: Charlie V <cv300g@xxxxxxxxx>;
To: Sandy Beard <sbeard2@xxxxxxxxxxxxxxx>; chrysler300@xxxxxxxxxxxxxxx <chrysler300@xxxxxxxxxxxxxxx>;
Subject: Re: [Chrysler300] adhesive for mounting 300 medallion
Sent: Thu, Jan 16, 2014 10:57:21 AM

Hi Steve,

A few years ago I was freshing up my grill and putting on a new 300 medallion from the club. I was looking for an adhesive and found " 3M Plastic Emblem Adhesive " and bought a tube thinking that it should be the perfect adhesive as I did have a plastic emblem and that's what it's for.

Whatever you do DO NOT buy and use " 3M Plastic Emblem Adhesive".

Here is what happen:

I used the adhesive according to the directions and adhered the emblem to the grill. I went about doing a few other things and a few minutes later I looked at the grill. The adhesive was eating away, melting, the plastic emblem from the backside.

I removed the emblem but the damage was already done.

I ordered another emblem from the club and this time I used clear silicone caulk. It worked perfectly and it's probably been on the car for about 8 years.

One other thing I did was make a metal plate with studs attached so that my emblem is easily removable. If my grill got damaged and I had to replace it I could easily unbolt the emblem and put it on the replacement grille. The plate works very well and looking at the car you can't tell I did that.

Good luck in whatever adhesive you do use but the clear silicone worked great for me.

Lion Charlie Valentine

300G

1962 300 Sport Convertible

From: Sandy Beard <sbeard2@xxxxxxxxxxxxxxx>
To: "chrysler300@xxxxxxxxxxxxxxx" <chrysler300@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 14, 2014 10:10 AM
Subject: [Chrysler300] adhesive for mounting 300 medallion

Hello group,
Months ago there was a discussion on what adhesive to use to mount 300 medallions. I saved it and my computer ate it.
I want to mount the front 300F medallion.
Any thoughts would be appreciated and Happy New Year.
Steve Beard
300F in Delaware, Ohio

__._,_.___

To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___