Re: [Chrysler300] Molding clips for side of 62
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Molding clips for side of 62





Mike,
I have 8 good used clips.
Since you have placed an order with Gary, you probably don't need any from me.
12 clips should be enough for both sides - probably more than enough.
If Gary is out or doesn't have enough, let me know and you can  have some of mine.
Doug


From: "Michael Moore" <mmoore8425@xxxxxxx>
To: "Rich Barber" <c300@xxxxxxx>
Cc: "Marshall Larson" <granitledge@xxxxxxxxx>, "300" <chrysler300@xxxxxxxxxxxxxxx>, "Gary & Alana Goers" <gary@xxxxxxxxxxxxx>
Sent: Saturday, January 11, 2014 12:02:14 PM
Subject: Re: [Chrysler300] Molding clips for side of 62

 

Thanks Rich,

I found the clips, but am not sure his price is still good, so I mailed him an order form with enough money to get me a dozen or so clips, but I told him to just send me that money's worth of clips! I was able to send hm a letter with the payment and the order form. His name has been brought up for congregational prayers in the past when thinhgs were going bad for him.
We especially worry about him because we had a close friend who had a similar problem which he said  was caused by stainless steel screws (subsequently removed) and resulted in a staph infection. 
Mike Moore

,  
On Jan 11, 2014, at 11:53 AM, Rich Barber <c300@xxxxxxx> wrote:

 

I recently heard from Gary Goers and he is doing much better.  He says he is able to get in 6-hour days before his leg, ankle and foot give out.  An open wound that was not predicted to heal is also closing.   He is appreciative of your prayers, patience and continued patronage.

 

His catalog may be viewed online at: http://www.garygoers.com/products.html    Molding clips are found on pages 34-36.  Communications with Gary are generally possible face-to-face in Kalispell, MT or by fax to:  406-752-6249.  Email to gary@xxxxxxxxxxxxx may also work.

< p class="MsoNormal"> 

C300K’ly,

Rich Barber

Brentwood, CA

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Michael Moore
Sent: Saturday, January 11, 2014 11:21 AM
To: Marshall Larson
Cc: 300
Subject: Re: [Chrysler300] Molding clips for side of 62

 

 

Thanks Marshall and all who made suggestions. I sent some money to Gary yesterday and asked him to send me some.

If I don't hear back in a while, I'll assume he doesn't have them and look elsewhere. I hope he's doing better.

Mike Moore

 

On Jan 11, 2014, at 9:13 AM, Marshall Larson <granitledge@xxxxxxxxx> wrote:

 

Do a search on Restoration Specialties & Supply.  They have many things for old cars.

 

On Thu, Jan 9, 2014 at 8:10 PM, Michael Moore <mmoore8425@xxxxxxx> wrote:

 

My 300H has a long molding attached to the sill. I need some new clips to make it tighter (all the old clips were not installed.

Does anyone know of a source for those?

Thanks

Mike Moore

300H

--
Marshall Larson

 






__._,_.___


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.