On 8/27/2013 7:37 PM, Dan Akol wrote: > I would like to put a gearvendors overdrive unit, or a Dodge 518 /616 / 47RH > / 47 RH overdrive transmission into my 300G. Has anyone attempted this. Any > thoughts or guidance would be appreciated. Thanks! Dan From what I understand so far, adding a gearvenders, you HAVE to check the transmission hump for clearances real carefully, some cars need the 'ol BFH' applied to it before things fit. -- Paul Holmgren This message was brought to you using at least 70% post-consumer recycled electrons ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/