[Chrysler300] RE: Inspection stamps

["Bob Jasinski" <rpjasin@xxxxxxxxxxx>]

Evidently Goers is the only one with the stamps, unless others chime in here
to the contrary.  I wasn't aware he was offering the clear stickers, but I
understand why.  You might send him a fax and ask if he will rent the stamps
out for your use.  I agree, the stickers kind of defeat the purpose of
enhancing the originality.  
 
Bob J
 
From: Ray Melton [mailto:rfmelton@xxxxxxx] 
Sent: Wednesday, July 03, 2013 9:37 AM
To: 'Bob Jasinski'; chrysler300@xxxxxxxxxxxxxxx
Subject: Inspection stamps
 
Hello Bob  and Group --
 
Thanks for the advice on placement of the inspector stamps.  I, too, would
like to apply the appropriate markings to my 300C, and am wondering how to
obtain those inspection stamps.  I would prefer to use the stamp/ink method
instead of the yellow on clear "stickers" that Gary Goers offers, just from
an original appearance aspect.  Since these stamps are a one-time use item
for any individual owner, I am hoping that if anyone has reproduced these
stamps, they might be willing to loan them to me for my own one-time use. 
 
Thanks for the help.
 
Ray Melton
Las Cruces, NM
1957 Chrysler 300C  convertible   white/Gauguin  "Big Red"
S/N 3N57 2517
 
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Bob Jasinski
Sent: Tuesday, July 02, 2013 1:38 PM
To: 'Daryl1086'; 'Chrysler 300 listserver'
Subject: RE: [Chrysler300] Fw: 1961 300-G OK stickers
 
  
Daryl,

I am not aware of any "stickers" the factory used to mark these quality
control areas. What they did do, was use rubber stamps to indicate approval
of the various areas . I know there are those in the Club that have
reproduced those stamps, Gary Goers being one, as he stamped my car at a
national meet in Santa Cruz many years ago. At the time we discussed
placement of the stamps, and he said that the location was somewhat
arbitrary, and proceeded to stamp my car as follows:

"OK Paint" on top of radiator support, driver's side
"OK Electrical" on inner fender, towards the rear, on the bulge near where
the park brake cable goes down
"OK Trim" on the bulkhead, near the power brake booster, driver's side.

Hope this helps.

Bob J

From: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com>
[mailto:Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300%40yahoogroups.com> ]
On
Behalf Of Daryl1086
Sent: Sunday, June 30, 2013 4:35 AM
To: Chrysler 300 listserver
Subject: [Chrysler300] Fw: 1961 300-G OK stickers



----- Original Message ----- 
From: daryl1086@xxxxxxxxxxx <mailto:daryl1086%40comcast.net>
<mailto:daryl1086%40comcast.net> 
To: list server, 300 
Cc: Zemke, Daryl 
Sent: Friday, June 28, 2013 8:28 AM
Subject: 1961 300-G OK stickers

Can anyone tell me where the OK stickers go on a 1961 Chrysler 300-G. The
stickers are 10B OK electrical, 11 OK paint and 12 OK trim.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/