[Chrysler300] Fw: A466 Torqueflite gearshift cable adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Fw: A466 Torqueflite gearshift cable adjustment





----- Forwarded Message -----
From: Brandt Jimerson <brandt300g@xxxxxxxxx>
To: "Chrysler300-unsubscribe@xxxxxxxxxxxxxxx" <Chrysler300-unsubscribe@xxxxxxxxxxxxxxx> 
Sent: Saturday, June 29, 2013 7:26 PM
Subject: A466 Torqueflite gearshift cable adjustment



Hello to all in 300sville!

Guess what??? My transmission is STILL a problem!! To make a long story short, after driving my G for after 30 to 50 or so minutes, the trans will go from a 3 to 1 kickdown instead of 3 to 2 at almost 45 mph!! Still the same problem for almost 2 years now!! Sometimes it will almost be at 50 when it does a 3 to 1! Now Jeff Carter (seems like I idolize him but I do), suggested the FIRST thing I look at, is the gearshift cable adjustment. I explained to Jeff that the 'head honcho', or owner of the tranny shop (where I fortunately have a lifetime warranty on trans) told me that I could NOT go from Reverse, straight to Nuetral, but I would have to go from Reverse, to Drive, then to Nuetral....... and I can't except only for a couple of times. Jeff basically told me heck NO! I suggested that it might be the slides behind the pushbuttons but he stated he's never had a problem with the slides. I also let him know that the tranny shop said 'that's how they
 are when they get old', (or something close to that). Again, JC told me no. The adjustment could be off and that could be my problem because too much or too little fluid is applying what there should be. I am going to either tow or drive it back to the 'tranny shop' next Wednsday and have him see if it is the gearshift cable. When I suggested to the owner of the shop that it could be the gearshift cable, he stated "I've been doing this for 50 years, I know how to adjust a gearshift cable". Just what I need at a time like this!!! His ego getting in the way. I need an open mind at this point. This is about the 2nd or 3rd time that this particular transmission has been rebuilt! The last time they tore it apart, at leaste they told be that the bands and clutches were still okay. Now it was brought to my attention by Jeff, a geat knowledgeable member of our club, that it takes two people to adjust the cable. One person up in the car pushing in the
 button(s) while another person down below adjusts it. When I asked the the local owner (who helped adjust the cable himself), he said "we got it as close as we could". Yikes, it makes me wonder!! Now to wrap this up here's the deal: I'm going to have to have Jeff on the phone with Greg (the owner) come Wednsday, and have JC explain to Greg about doing it but how the heck is that going to happen when Greg will probably take offense to this! What do I do! I need to rule out this possibility and if that's not it, go to the next thing. Any suggestions out there as of what to say to Greg? I hope he has an open mind because Melissa (my G), needs to be fixed!!
 By the way, Jeff is doing fine and staying with the neighbors in as good of spirits as possible until his house is refurbished enough to move back in (because of the smoke damage that the fire caused). Well, I'll all keep ypu updated! Bye for now!

Sincerely & 300ly, Brandt H J with a G

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.