RE: [Chrysler300] RE: C300 with water in the oil :(
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] RE: C300 with water in the oil :(



I forgot to mention that Chrysler/Dodge have a fix consisting of a revised cowl molding (black plastic).  Water on top of the block and adjacent to a leaky intake manifold could damage any engine, even a stout old Chrysler 300 hemi.  The failures often came after downpours or after going through a car wash.

 

Rich

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of pffkllc@xxxxxxx
Sent: Monday, May 13, 2013 10:32 AM
To: c300@xxxxxxx; 300@xxxxxxxx
Cc: chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] RE: C300 with water in the oil :(

 

  

Hi All:

Had the same problem with my 99 Dodge Ram 1500 (360 ci) and solved it 
by putting a line of deflecting material in an inverted V to divert the 
water to either side of the block. Haven't had the problem since. 

Pete Fitch


In a message dated 5/13/2013 1:09:44 P.M. Eastern Daylight Time, 
c300@xxxxxxx <mailto:c300%40ez2.net>  writes:

On a similar vein, I noted in another online forum that the 345 hemi’s such
as are found in my ’05 Dodge Durango have been experiencing catastrophic 
failures due to rain or carwash water leaking past the cowl seal, standing 
on top of the block and being ingested into the intake system past leaky 
intake gaskets. The water goes into the cylinder and, being incompressible, 
forms hydraulic lock, piston, rod, block and cylinder head failures. It would 
seem that water leaking from a head gasket into the top end of a cylinder 
could do the same thing.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.