I have had great luck sealing leaking studs on brand X, by cleaning and drying the casting and stud and treating them both with good pipe sealant then assemble bottoming to the stud shoulder. I like Permatex brand but I am sure any name brand would work fine. To: chrysler300@xxxxxxxxxxxxxxx From: larry@xxxxxxxxxx Date: Sun, 10 Feb 2013 15:23:15 -0600 Subject: [Chrysler300] EXhaust Manifold Stud Sealant 330D What is the best sealant to use on the Exhaust Manifold Studs to prevent the coolant from leaking out past the stud? Thank You Larry Jabin San Francisco [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/