As you go to remove the heater core, be very careful with the large fiber housing that shrouds the heater core during removal. I have found these to be brittle and therefore very fragile. Good luck, Richard Osborne On Feb 5, 2013, at 3:40 PM, Fred Grossi <lowtax@xxxxxxxxxxxxx> wrote: > Hello Group, > > My heater core is leaking in my 1960 300F. Can these cores be repaired or > must they be replaced. If it has to be replaced, any sources for this part > would be greatly appreciated. > > Thanks, > > Fred Grossi > > Arroyo Grande, CA > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/