Thank you, Charlotte. Say Hi and best wishes to Gary from his many friends. I was thinking the dies were only for the later years. Could you confirm which years the dies are for? They might fit the earlier cars but be of a different design? Those in my '64K's have three crowns and about half the length embossed with grooves running at right angles to the long dimension of the plate. Rich Barber Brentwood, CA From: Gary Goers [mailto:gary@xxxxxxxxxxxxx] Sent: Tuesday, February 05, 2013 7:44 AM To: Rich Barber Subject: Re: [Chrysler300] 1960 300F Sill Plates Hi Rich, The sill plates are still in the works. The dies are mostly finished and in 2 weeks they will begin stamping them. Gary should have them in about 6 weeks. He's doing alittle better and still on the mend. Thanks, Charlotte ----- Original Message ----- From: Rich Barber <mailto:c300@xxxxxxx> To: Gary <mailto:gary@xxxxxxxxxxxxx> & Alana Goers Sent: Monday, February 04, 2013 7:55 PM Subject: FW: [Chrysler300] 1960 300F Sill Plates Gary & All: Hoping Gary is mending well and all ducks are in order. Any update on the sill plates? Rich Barber Director and Membership Manager Chrysler 300 Club, Inc. 1801 Redwine Terrace Brentwood, CA 94513-6000 Home: (925) 513-6583 Cell: (925) 783-4893 e-mail: c300@xxxxxxx Website: www.chrysler300clubinc.com From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Robert Hayen Sent: Monday, February 04, 2013 5:47 PM To: chrysler300@xxxxxxxxxxxxxxx; Larry Jabin Subject: Re: [Chrysler300] 1960 300F Sill Plates gary was in the process of sill plates for 60 to 64 chrysler just before head fell and broke his ankle. they are in the works, i think any way... havn't talked to him lately but will be going there tomorrow.. he does have the heal plates for f and g made. i have a pair at my place if any body would like to see a picture of them. they are made of 1/4 thick plate aluminum. they are very nice they are very rigid . they have not been anodized ... i think he is leaving that up to the buyer to have them chromed or anodized .. bob hayen 406 752 5152 ----- Original Message ----- From: Larry Jabin To: chrysler300@xxxxxxxxxxxxxxx <mailto:chrysler300%40yahoogroups.com> Sent: Monday, February 04, 2013 4:39 PM Subject: [Chrysler300] 1960 300F Sill Plates Does anybody make new sill plates for 1960 300F? Thank You Larry Jabin [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/