Re: [Chrysler300] Speedometer problems on a K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Speedometer problems on a K



I have had the same problem years ago. It turned out to be the grease the cable rebuilder put in had dried up. (do not put grease in speedo cable) Try disconnecting the cable at both ends and forcing penatrating oil into the top of the cable until it flows freely out the other end. In my instance I got a fitting from the "truck" speedometer repair shop so that I could screw it onto the cable end and pressurize the cable. You will be surprised what comes out of the other end.... 
PS: penetrating oil which contained "so called teflon" also lubricates the cable almost permanently. PPS: to keep the EPA and you state green persons happy, use a bucket on the outflow end to catch the nasty stuff... 

----- Original Message -----
From: News4ge@xxxxxxx 
To: Chrysler300@xxxxxxxxxxxxxxx 
Sent: Tuesday, September 11, 2012 8:45:04 AM 
Subject: [Chrysler300] Speedometer problems on a K 







Hi, 

When the needle bounces up and down a few minutes, then stays on zero, is there any way to know if it's the cable or the head? 

I had both reconditoned a few thousand miles ago (about 8 years). 

Any advice would be greatly appreciated. 

Thanks, 

George Clineman 

[Non-text portions of this message have been removed] 




[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.