You say another style of nose, is it the yoke style with a round mount for the transmission? Bill Huff At 4/18/201212:25 PM, Matt Allyn wrote: > > >Imperial Services had them. >I went to a place and had them chop off the >trunion / ball set up and replace it another >style of driveshaft nose that still retains the >original style of movement. This way I no >longer need to worry about that rubber boot >tearing and all of the grease spinning out. If you care...that place is: > >Driveline's Unlimited >Wade King >6 McLaren Street >Irvine, CA 92618 >(949) 951-9673 > > >Matt Allyn > >From: Fern <<mailto:crc%40cyberlink.bc.ca>crc@xxxxxxxxxxxxxxx> >To: <mailto:Chrysler300%40yahoogroups.com>Chrysler300@xxxxxxxxxxxxxxx >Sent: Wednesday, April 18, 2012 7:51 AM >Subject: [Chrysler300] re source of boot for 1962 drive shaft > > >What is the source of the boot assembly to use on 1962 300H drive shaft? >Fern > >[Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/