Re: [Chrysler300] Adapter Joints

[John Lazenby <french_fryguy@xxxxxxxxx>]

The U-Joints have been sold.
 
John Lazenby
 

________________________________
 From: John Lazenby <french_fryguy@xxxxxxxxx>
To: Ronald Kurtz <mark6268@xxxxxxxxxxxxx>; "chrysler300@xxxxxxxxxxxxxxx" <chrysler300@xxxxxxxxxxxxxxx> 
Sent: Monday, March 12, 2012 8:42 AM
Subject: Re: [Chrysler300] Adapter Joints
  

Based on Ron's interchange I have (2) GMB 210-1309 that are the same as NEAPCO # 2-0527.  Cost is $8.12 each plus shipping from Anaheim, California.
 
Should anyone have an interest send me a PM at this address:  french_fryguy@xxxxxxxxx
 
John Lazenby
 

________________________________
 From: Ronald Kurtz <mark6268@xxxxxxxxxxxxx>
To: chrysler300@xxxxxxxxxxxxxxx 
Sent: Monday, March 12, 2012 8:03 AM
Subject: [Chrysler300] Adapter Joints
  

   
 
Hello, everyone:

For those who plan a differental gear change (2.76 to 3.23), there's a good 
chance the differential carrier will not be the same (741 to a 742 or 489).  If 
so, you will need an adapter universal joint that can accomodate the difference 
in the wider yoke inner span (2 5/8") on the carrier while keeping the same 
drive shaft span (2 1/8"). It's far less expensive than altering the driveshaft. 
Below are the sources and part numbers for the adaptor joint:

Spicer # 5-527
Precision #347
TRW #20226
Mancini #5-527x
Auto Zone #2-0527
NAPA #NUJ 240 0369
NEAPCO #2-0527

I recently purchased the NEAPCO joint but my search found the other part numbers 
found these. Check for availability as some stores may no longer carry this 
joint. I thought this information would be useful to some of you.

Thanks to those who brought this to my attention. The adapter joint fit like a 
hand in a glove.

Best,
Ron Kurtz
E #292   

[Non-text portions of this message have been removed]

   
      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/