Re: [Chrysler300] 1958 Chrysler gas tank removal?

[Keith Boonstra <kboonstra@xxxxxxxxxxxx>]

It may be a little easier than you feared, Josh.  The filler tube just 
slides into the tank and has an O-ring seal.  You may have to work it 
around a bit, but it should pull right out.

Keith Boonstra

-


On 3/4/2012 9:13 PM, hyfire303 wrote:
>
>
>
> Hello guys,
>
> I am stumped. I am working on my 300D and disconnected the small fuel 
> line going to the fuel pump and the connector from the gauge....
>
> BUT can't see how to remove the filler tube from the gas tank! I am 
> not seeing any rubber hose.
>
> >From below I see a few inches of a metal neck but it disappears into 
> the body.
>
> >From the trunk I only see the metal shielding tube. Where do I 
> disconnect the fuel tank from the filler??????
>
> THANKS!!!
>
> Josh
>
> 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/