[Chrysler300] Chrysler special tools

[JettLarry@xxxxxxx]

Now this is a loooong shot but who knows?  There is a special tool used to remove the turn signal cover in 64 and 63 cars with tilt.  Shown on page 41 of the 64 FSM It is a puller tool C-3954 with Tool-SP-3462A weights attached.  Anybody disassmbled one of these GM built tilt columns?  Am learning far more than I want to about these columns but "knowledge is power" I'm told so will be very powerfull in at least this area when this is over.  Merry Christmas to my special friends......YOU.

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/