Gotta hand it to my wife who came up with a temporary solution at least. She suggested Velcro to hold it up. I don't know though if I'd want to take a chance of messing up our new headliner or visor covers by sticking Velcro to it, but it's a thought anyway. Actually one thing I thought of trying is to shrink a wiring tube onto it. But I think the sharp edge of the friction clip inside the visor would cut it as the visor is slid on. I did try to put a piece of electrical tape on the rod. The clip inside hamburgered the tape, and now the adhesive slime has made it even more slippery than it was before I started. Maybe I'll have to just drive some big ol' screws up through them and up through the roof. Or maybe we'll have to slide them off and put them back on every time the sun shines. You guys can do better than that. Keith - On 9/24/2011 10:44 PM, Michael Moore wrote: > Please reply publicly as I also have this problem on my H. > Thanks, Mike Moore > > On Sep 24, 2011, at 7:15 PM, keboonstra wrote: > >> I can usually figure out a way to fix a lot of little details, but this one has me stumped and I hope one of you has a trick I can use. >> >> Both of the sunvisors on our C are too slippery on their rods, and as you go down the road they both drop down. What I've tried so far to correct the situation has made it worse if anything. >> >> Does anyone have a way to increase the friction of the visor on the rod? >> >> Thanks. >> >> Keith Boonstra >> >> > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > To send a message to this group, send an email to: > Chrysler300@xxxxxxxxxxxxxxx > > To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or > go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button > > For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm > > For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links > > > ------------------------------------ To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Chrysler300/join (Yahoo! ID required) <*> To change settings via email: Chrysler300-digest@xxxxxxxxxxxxxxx Chrysler300-fullfeatured@xxxxxxxxxxxxxxx <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/