RE: [Chrysler300] G ignition switch

["Knutsen, Mark C" <Mark.Knutsen@xxxxxxxxxxxxxxxxx>]

No - it only controls the current flow. Sounds like you have a
mechanical issue wit the key. Did you recently have new keys cut?

 

  - Mark

________________________________

From: Bruce Ehrmann [mailto:behrmann@xxxxxxx] 
Sent: Thursday, September 22, 2011 7:39 AM
To: Knutsen, Mark C; moparpjf@xxxxxxx; schroe99@xxxxxxxxxxxx;
Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] G ignition switch

 

Thank you for this information. Would the Neutral safety switch prevent
the key from turning in the ignition cylinder lock, which is what's
happening? The key will not turn without 15 minutes of jiggling, if I'm
lucky. And when I'm lucky and it turns, the car starts and runs
beautifully.

 

From: Knutsen, Mark C <mailto:Mark.Knutsen@xxxxxxxxxxxxxxxxx>  

Sent: Wednesday, September 21, 2011 12:45 PM

To: moparpjf@xxxxxxx ; schroe99@xxxxxxxxxxxx ;
Chrysler300@xxxxxxxxxxxxxxx 

Cc: behrmann@xxxxxxx 

Subject: RE: [Chrysler300] G ignition switch

 

Neutral safety switch has also been known to cause a headache or two.

 

  - Mark Knutsen

________________________________

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]
On Behalf Of moparpjf@xxxxxxx
Sent: Wednesday, September 21, 2011 11:41 AM
To: schroe99@xxxxxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Cc: behrmann@xxxxxxx
Subject: Re: [Chrysler300] G ignition switch

 

  

Could be the starter relay and not the switch - screwdriver blade
between 
the contacts of the relay while the switch is "on" and the car in
neutral 
should answer that question.

Pete Fitch


In a message dated 9/21/2011 12:10:29 P.M. Eastern Daylight Time, 
mailto:schroe99%40newnorth.net writes:

Hello,

Former (2009) member Bruce Ehrmann is having difficulty with his G
ignition
switch working erratically. Bruce would like to attend the Lake George 
meet
with his brother but is concerned about potential trouble. The G is 
located
in Columbia County NY not far from Lake George.

Please contact Bruce if you have advice for him about the switch or 
possibly
have a replacement ignition switch he could buy. You can email Bruce at
mailto:behrmann%40rcn.com or call at 646-613-2602 or cell 917-509-7209

Thanks,

Carlton Schroeder 

[Non-text portions of this message have been removed]

------------------------------------

To send a message to this group, send an email to:
mailto:Chrysler300%40yahoogroups.com

To unsubscribe from this group, send an email to
mailto:bob%40simplexco.com or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select
the 
"Leave Group" button

For list server instructions, go to 
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to 
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups
Links

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/