Re: [Chrysler300] 300-G timing gear

["Gary Barker" <gbarker@xxxxxxxxxxxx>]

You will have to buy a set of off set keys to use on the crankshaft gear.  The come in a set of 2,4,6 degrees.  Most all speed shops and some auto parts stores have them.   I got mine from Summit.     
                      Gary Barker

From: darylzemke 
Sent: Tuesday, September 20, 2011 12:25 PM
To: Chrysler300@xxxxxxxxxxxxxxx 
Subject: [Chrysler300] 300-G timing gear


  
Does anyone know of a source for the timing gear for a 1961 300-G. The hole in these gears are supposed to be retirede by two degrees. They are different than the standard gear for a 413 inch Chrysler.





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/