Re: [Chrysler300] Won't Go Past 80!

["Warren Anderson" <wranderson@xxxxxxxxxxxxx>]

  Doug,

  There is a permanent (?) magnet, driven by the speedo cable,  that spins inside a cup. The cup is attached to the pointer. Non contact drive coupling. There is a spring, torsionally back biased against magnet rotation. So, the spring that is the calibration device for the unit is binding up, a weak magnet, magnetized cup or maybe a bad magnet bearing and something mechanical out place and stopping the pointer at 80. All might suggest a trip to a speedo shop would be in order?

  Warren Anderson
  Sedona,AZ

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/