[Chrysler300] Power steering and windshield washer questions (300D)

["aaarrgghhh5" <gwmicrocap@xxxxxxx>]

I'm was hoping someone has run into either of these situations before as we're getting close to finishing the 300D after 45 years of being a pile of parts.  

when the car is started the power steering spins the wheels all the way to one side and stays there.  The original box was tight (as the car had only 40K on it), so just a couple of the outer seals were replaced and it was put back in.  Does anyone have any suggestions short of taking the steering box back out of the car to have it torn down?

on the windshield washer foot pump...when hooked up the wipers no longer have variable speed and do not park properly.  The pump also does not seem to acutate the wash cycle either.  so after trying a couple of switches and motors, my conclusion is something in the pump switch is defective.  Any thoughts?  

Thanks!
Greg Weaver
300D convertible



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/